š„Solution Welding Flux-Cored Rods
Regular price
Ā£9.99
Sale price
Ā£5.99
Unit price
per
customers are viewing
units sold
TheĀ Strongest, Fastest, and Easiest Aluminum Fabrication or Parts Repairā no expensive equipment required.
Makes a sound joint with slight penetration to base metal that is stronger than mild steel. Join thick or thin parts with a 45,000 lb tensile strength.Ā
Ā 
Why Welders, Mechanics, & Household Handymen are calling Solution Welding RodsĀ "TheĀ Strongest, Fastest, and Easiest Aluminum Fabrication or Parts Repairā no expensive equipment required.
Does The Impossible.
Makes a sound joint with slight penetration to base metal that is stronger than mild steel. Join thick or thin parts with a 45,000 lb tensile strength.Ā
Extreme Performance. By Design.Ā
Solution Welding Rods areĀ engineered to easily flow under a very low working temperature to ensure fast application to your project with minimal distortion.
From Amateur To Pro.
Regardless of your prior experience, anyone can weld aluminum without the need for expensive equipment like welding machines. All you need is a simple propane torch and some easy welding rods.
Ā Ā Ā 
Ā
Welding Instructions:
Ā
1. ThoroughlyĀ clean the area youāre about to weldĀ by brushing the base with stainless steel brush until it becomes shiny.
2. ThenĀ evenly heat the area to be welded.
3. As you heat,Ā rub the rod vigorously against theĀ heated area until the rod starts flowing.
Caution:Ā Never apply heat directly to the rod as it will crumb,Ā and if you manage to melt the rod directly, the weld will be easily breakable.Ā Remember, melting the rod directly is a wrong way, and makes crumby welds.Ā
YouĀ Talked, and WeĀ Listened.
Every aspect of Solution Welding Rods are designed for the pursuit of performance to be the world's best in classĀ in Aluminum and other non-ferrous materials repair.
"I am writing to you because I used your product and was amazed immediately. I had never welded aluminum and these are photo and crude stress test on the tubes I welded. If you look close the lower square tubes bent and the weld did not even crack when I was hitting other tube with a hammer. Also has high stress on bonding point. Thanks I have save a ton of money on fixing other items and since then I am welding large items and making nice looking welds.
Thanks"
Tacho CoronadoĀ āāāāā
Just aĀ fewĀ of the many parts that can beĀ easilyĀ repaired!
āļøAluminum Heads |
āļøFuel TanksĀ |
āļøCast Iron Heads |
āļøManifolds |
āļøA/C Lines |
āļøFenders |
āļøTruck Beds |
āļøTransmission Cases |
āļøRadiators |
āļøGenerators |
āļøPot Metal Parts |
āļøIrrigation Pipes |
āļøRefrigeration |
āļøRivets |
āļøCondenser Lines |
āļøAftercoolers |
āļøIndustrial Parts |
āļøAluminum Molds |
āļøTruck Beds |
āļøTiming Covers |
Ā āļøMastĀ Ā Ā Ā Ā Ā Ā Ā |
āļøComplete FabricationĀ Ā |
āļøTool Boxes |
āļøAluminum Boats |
āļøSeams |
āļøTowers |
āļøLadders |
āļøCavitation Plates |
Product Benefits:
- The easy-to-melt weldingĀ rods areĀ high-quality specialĀ rods that are mainly used for welding / brazing aluminum and aluminum alloys.Ā However, they can also be used for hard welding non-ferrous metals other than stainless steel.
- Recommended for welding aluminum alloys: 1060, 1350, 3003, 3004, 3005, 5005, 5050, 6053, 6061, 6951, 7005 and cast alloys 710.0 and 711.0
- Applications include cargo areas, loading ramps, docks, diamond plates, irrigation lines, engine blocks, gearboxes, etc.
- Prepared for small repairs.Ā For repairs that would compromise safety if they are not repaired, we recommend replacing the parts completely instead of repairing them.
specifications:
- Material:Ā aluminum
- Melting temperature:Ā <480 Ā° C (896 Ā° F)
- No leakage of gases or toxins, no lead material included.
- Excellent corrosion resistance
- Minimize the distortion of the starting material during welding.
- Size:Ā 50cm x 1.6mm.Ā (Ā According to theĀ manual measurement, there may be a subtle deviation.Ā )
Ā 
Package Includes:
- 10 pcs Welding Rods(25g)
- 30 pieces * Welding Rods(75g)
- 50 pieces * Welding Rods(125g)
